eth_getLogs will return results.
net {
type = mainnet
# type = testnet
}
storage {
# Directory for storing persistent data
db.engine = "LEVELDB",
db.sync = true,
db.directory = "database",
index.directory = "index",
transHistory.switch = "on",
# You can custom these 14 databases' configs:
# account, account-index, asset-issue, block, block-index,
# block_KDB, peers, properties, recent-block, trans,
# utxo, votes, witness, witness_schedule.
# Otherwise, db configs will remain default and data will be stored in
# the path of "output-directory" or which is set by "-d" ("--output-directory").
# setting can impove leveldb performance .... start
# node: if this will increase process fds,you may be check your ulimit if 'too many open files' error occurs
# see https://github.com/tronprotocol/tips/blob/master/tip-343.md for detail
# if you find block sync has lower performance,you can try this settings
#default = {
# maxOpenFiles = 100
#}
#defaultM = {
# maxOpenFiles = 500
#}
#defaultL = {
# maxOpenFiles = 1000
#}
# setting can impove leveldb performance .... end
# Attention: name is a required field that must be set !!!
properties = [
// {
// name = "account",
// path = "storage_directory_test",
// createIfMissing = true,
// paranoidChecks = true,
// verifyChecksums = true,
// compressionType = 1, // compressed with snappy
// blockSize = 4096, // 4 KB = 4 * 1024 B
// writeBufferSize = 10485760, // 10 MB = 10 * 1024 * 1024 B
// cacheSize = 10485760, // 10 MB = 10 * 1024 * 1024 B
// maxOpenFiles = 100
// },
// {
// name = "account-index",
// path = "storage_directory_test",
// createIfMissing = true,
// paranoidChecks = true,
// verifyChecksums = true,
// compressionType = 1, // compressed with snappy
// blockSize = 4096, // 4 KB = 4 * 1024 B
// writeBufferSize = 10485760, // 10 MB = 10 * 1024 * 1024 B
// cacheSize = 10485760, // 10 MB = 10 * 1024 * 1024 B
// maxOpenFiles = 100
// },
]
needToUpdateAsset = true
//dbsettings is needed when using rocksdb as the storage implement (db.engine="ROCKSDB").
//we'd strongly recommend that do not modify it unless you know every item's meaning clearly.
dbSettings = {
levelNumber = 7
//compactThreads = 32
blocksize = 64 // n * KB
maxBytesForLevelBase = 256 // n * MB
maxBytesForLevelMultiplier = 10
level0FileNumCompactionTrigger = 4
targetFileSizeBase = 256 // n * MB
targetFileSizeMultiplier = 1
}
//backup settings when using rocks db as the storage implement (db.engine="ROCKSDB").
//if you want to use the backup plugin, please confirm set the db.engine="ROCKSDB" above.
backup = {
enable = false // indicate whether enable the backup plugin
propPath = "prop.properties" // record which bak directory is valid
bak1path = "bak1/database" // you must set two backup directories to prevent application halt unexpected(e.g. kill -9).
bak2path = "bak2/database"
frequency = 10000 // indicate backup db once every 10000 blocks processed.
}
balance.history.lookup = true
# checkpoint.version = 2
# checkpoint.sync = true
# the estimated number of block transactions (default 1000, min 100, max 10000).
# so the total number of cached transactions is 65536 * txCache.estimatedTransactions
# txCache.estimatedTransactions = 1000
# if true, transaction cache initialization will be faster. default false
# txCache.initOptimization = true
# data root setting, for check data, currently, only reward-vi is used.
# merkleRoot = {
# reward-vi = 9debcb9924055500aaae98cdee10501c5c39d4daa75800a996f4bdda73dbccd8 // main-net, Sha256Hash, hexString
# }
}
node.discovery = {
enable = true
persist = true
}
# custom stop condition
#node.shutdown = {
# BlockTime = "54 59 08 * * ?" # if block header time in persistent db matched.
# BlockHeight = 33350800 # if block header height in persistent db matched.
# BlockCount = 12 # block sync count after node start.
#}
node.backup {
# udp listen port, each member should have the same configuration
port = 10001
# my priority, each member should use different priority
priority = 8
# time interval to send keepAlive message, each member should have the same configuration
keepAliveInterval = 3000
# peer's ip list, can't contain mine
members = [
# "ip",
# "ip"
]
}
crypto {
engine = "eckey"
}
# prometheus metrics start
# node.metrics = {
# prometheus{
# enable=true
# port="9527"
# }
# }
# prometheus metrics end
node {
# trust node for solidity node
# trustNode = "ip:port"
trustNode = "127.0.0.1:50051"
# expose extension api to public or not
walletExtensionApi = true
listen.port = 18888
connection.timeout = 2
fetchBlock.timeout = 200
tcpNettyWorkThreadNum = 0
udpNettyWorkThreadNum = 1
# Number of validate sign thread, default availableProcessors
# validateSignThreadNum = 16
maxConnections = 30
minConnections = 8
minActiveConnections = 3
maxConnectionsWithSameIp = 2
maxHttpConnectNumber = 50
minParticipationRate = 15
isOpenFullTcpDisconnect = false
inactiveThreshold = 600 //seconds
p2p {
version = 11111 # 11111: mainnet; 20180622: testnet
}
active = [
# Active establish connection in any case
# Sample entries:
# "ip:port",
# "ip:port"
]
passive = [
# Passive accept connection in any case
# Sample entries:
# "ip:port",
# "ip:port"
]
fastForward = [
"100.27.171.62:18888",
"15.188.6.125:18888"
]
http {
fullNodeEnable = true
fullNodePort = 8090
solidityEnable = true
solidityPort = 8091
PBFTEnable = true
PBFTPort = 8092
}
rpc {
enable = true
port = 50051
solidityEnable = true
solidityPort = 50061
PBFTEnable = true
PBFTPort = 50071
# Number of gRPC thread, default availableProcessors / 2
# thread = 16
# The maximum number of concurrent calls permitted for each incoming connection
# maxConcurrentCallsPerConnection =
# The HTTP/2 flow control window, default 1MB
# flowControlWindow =
# Connection being idle for longer than which will be gracefully terminated
maxConnectionIdleInMillis = 60000
# Connection lasting longer than which will be gracefully terminated
# maxConnectionAgeInMillis =
# The maximum message size allowed to be received on the server, default 4MB
# maxMessageSize =
# The maximum size of header list allowed to be received, default 8192
# maxHeaderListSize =
# Transactions can only be broadcast if the number of effective connections is reached.
minEffectiveConnection = 1
# The switch of the reflection service, effective for all gRPC services
# reflectionService = true
}
# number of solidity thread in the FullNode.
# If accessing solidity rpc and http interface timeout, could increase the number of threads,
# The default value is the number of cpu cores of the machine.
#solidity.threads = 8
# Limits the maximum percentage (default 75%) of producing block interval
# to provide sufficient time to perform other operations e.g. broadcast block
# blockProducedTimeOut = 75
# Limits the maximum number (default 700) of transaction from network layer
# netMaxTrxPerSecond = 700
# Whether to enable the node detection function, default false
# nodeDetectEnable = false
# use your ipv6 address for node discovery and tcp connection, default false
# enableIpv6 = false
# if your node's highest block num is below than all your pees', try to acquire new connection. default false
# effectiveCheckEnable = false
# Dynamic loading configuration function, disabled by default
# dynamicConfig = {
# enable = false
# Configuration file change check interval, default is 600 seconds
# checkInterval = 600
# }
dns {
# dns urls to get nodes, url format tree://{pubkey}@{domain}, default empty
treeUrls = [
#"tree://AKMQMNAJJBL73LXWPXDI4I5ZWWIZ4AWO34DWQ636QOBBXNFXH3LQS@main.trondisco.net",
]
# enable or disable dns publish, default false
# publish = false
# dns domain to publish nodes, required if publish is true
# dnsDomain = "nodes1.example.org"
# dns private key used to publish, required if publish is true, hex string of length 64
# dnsPrivate = "b71c71a67e1177ad4e901695e1b4b9ee17ae16c6668d313eac2f96dbcda3f291"
# known dns urls to publish if publish is true, url format tree://{pubkey}@{domain}, default empty
# knownUrls = [
#"tree://APFGGTFOBVE2ZNAB3CSMNNX6RRK3ODIRLP2AA5U4YFAA6MSYZUYTQ@nodes2.example.org",
# ]
# staticNodes = [
# static nodes to published on dns
# Sample entries:
# "ip:port",
# "ip:port"
# ]
# merge several nodes into a leaf of tree, should be 1~5
# maxMergeSize = 5
# only nodes change percent is bigger then the threshold, we update data on dns
# changeThreshold = 0.1
# dns server to publish, required if publish is true, only aws or aliyun is support
# serverType = "aws"
# access key id of aws or aliyun api, required if publish is true, string
# accessKeyId = "your-key-id"
# access key secret of aws or aliyun api, required if publish is true, string
# accessKeySecret = "your-key-secret"
# if publish is true and serverType is aliyun, it's endpoint of aws dns server, string
# aliyunDnsEndpoint = "alidns.aliyuncs.com"
# if publish is true and serverType is aws, it's region of aws api, such as "eu-south-1", string
# awsRegion = "us-east-1"
# if publish is true and server-type is aws, it's host zone id of aws's domain, string
# awsHostZoneId = "your-host-zone-id"
}
# open the history query APIs(http&GRPC) when node is a lite fullNode,
# like {getBlockByNum, getBlockByID, getTransactionByID...}.
# default: false.
# note: above APIs may return null even if blocks and transactions actually are on the blockchain
# when opening on a lite fullnode. only open it if the consequences being clearly known
openHistoryQueryWhenLiteFN = false
jsonrpc {
# Note: If you turn on jsonrpc and run it for a while and then turn it off, you will not
# be able to get the data from eth_getLogs for that period of time.
httpFullNodeEnable = true
httpFullNodePort = 8545
httpSolidityEnable = true
httpSolidityPort = 8555
httpPBFTEnable = true
httpPBFTPort = 8565
# The maximum blocks range to retrieve logs for eth_getLogs, default value is 5000,
# should be > 0, otherwise means no limit.
maxBlockRange = 5000
# The maximum number of allowed topics within a topic criteria, default value is 1000,
# should be > 0, otherwise means no limit.
maxSubTopics = 1000
}
# Disabled api list, it will work for http, rpc and pbft, both fullnode and soliditynode,
# but not jsonrpc.
# Sample: The setting is case insensitive, GetNowBlock2 is equal to getnowblock2
#
# disabledApi = [
# "getaccount",
# "getnowblock2"
# ]
}
## rate limiter config
rate.limiter = {
# Every api could be set a specific rate limit strategy. Three strategy are supported:GlobalPreemptibleAdapter、IPQPSRateLimiterAdapte、QpsRateLimiterAdapter
# GlobalPreemptibleAdapter: permit is the number of preemptible resource, every client must apply one resourse
# before do the request and release the resource after got the reponse automaticlly. permit should be a Integer.
# QpsRateLimiterAdapter: qps is the average request count in one second supported by the server, it could be a Double or a Integer.
# IPQPSRateLimiterAdapter: similar to the QpsRateLimiterAdapter, qps could be a Double or a Integer.
# If do not set, the "default strategy" is set.The "default startegy" is based on QpsRateLimiterAdapter, the qps is set as 1000.
#
# Sample entries:
#
http = [
# {
# component = "GetNowBlockServlet",
# strategy = "GlobalPreemptibleAdapter",
# paramString = "permit=1"
# },
# {
# component = "GetAccountServlet",
# strategy = "IPQPSRateLimiterAdapter",
# paramString = "qps=1"
# },
# {
# component = "ListWitnessesServlet",
# strategy = "QpsRateLimiterAdapter",
# paramString = "qps=1"
# }
],
rpc = [
# {
# component = "protocol.Wallet/GetBlockByLatestNum2",
# strategy = "GlobalPreemptibleAdapter",
# paramString = "permit=1"
# },
# {
# component = "protocol.Wallet/GetAccount",
# strategy = "IPQPSRateLimiterAdapter",
# paramString = "qps=1"
# },
# {
# component = "protocol.Wallet/ListWitnesses",
# strategy = "QpsRateLimiterAdapter",
# paramString = "qps=1"
# },
]
# global qps, default 50000
# global.qps = 50000
# IP-based global qps, default 10000
# global.ip.qps = 10000
}
seed.node = {
# List of the seed nodes
# Seed nodes are stable full nodes
# example:
# ip.list = [
# "ip:port",
# "ip:port"
# ]
ip.list = [
"3.225.171.164:18888",
"52.8.46.215:18888",
"3.79.71.167:18888",
"108.128.110.16:18888",
"18.133.82.227:18888",
"35.180.81.133:18888",
"13.210.151.5:18888",
"18.231.27.82:18888",
"3.12.212.122:18888",
"52.24.128.7:18888",
"15.207.144.3:18888",
"3.39.38.55:18888",
"54.151.226.240:18888",
"35.174.93.198:18888",
"18.210.241.149:18888",
"54.177.115.127:18888",
"54.254.131.82:18888",
"18.167.171.167:18888",
"54.167.11.177:18888",
"35.74.7.196:18888",
"52.196.244.176:18888",
"54.248.129.19:18888",
"43.198.142.160:18888",
"3.0.214.7:18888",
"54.153.59.116:18888",
"54.153.94.160:18888",
"54.82.161.39:18888",
"54.179.207.68:18888",
"18.142.82.44:18888",
"18.163.230.203:18888",
# "[2a05:d014:1f2f:2600:1b15:921:d60b:4c60]:18888", // use this if support ipv6
# "[2600:1f18:7260:f400:8947:ebf3:78a0:282b]:18888", // use this if support ipv6
]
}
genesis.block = {
# Reserve balance
assets = [
{
accountName = "Zion"
accountType = "AssetIssue"
address = "TLLM21wteSPs4hKjbxgmH1L6poyMjeTbHm"
balance = "99000000000000000"
},
{
accountName = "Sun"
accountType = "AssetIssue"
address = "TXmVpin5vq5gdZsciyyjdZgKRUju4st1wM"
balance = "0"
},
{
accountName = "Blackhole"
accountType = "AssetIssue"
address = "TLsV52sRDL79HXGGm9yzwKibb6BeruhUzy"
balance = "-9223372036854775808"
}
]
witnesses = [
{
address: THKJYuUmMKKARNf7s2VT51g5uPY6KEqnat,
url = "http://GR1.com",
voteCount = 100000026
},
{
address: TVDmPWGYxgi5DNeW8hXrzrhY8Y6zgxPNg4,
url = "http://GR2.com",
voteCount = 100000025
},
{
address: TWKZN1JJPFydd5rMgMCV5aZTSiwmoksSZv,
url = "http://GR3.com",
voteCount = 100000024
},
{
address: TDarXEG2rAD57oa7JTK785Yb2Et32UzY32,
url = "http://GR4.com",
voteCount = 100000023
},
{
address: TAmFfS4Tmm8yKeoqZN8x51ASwdQBdnVizt,
url = "http://GR5.com",
voteCount = 100000022
},
{
address: TK6V5Pw2UWQWpySnZyCDZaAvu1y48oRgXN,
url = "http://GR6.com",
voteCount = 100000021
},
{
address: TGqFJPFiEqdZx52ZR4QcKHz4Zr3QXA24VL,
url = "http://GR7.com",
voteCount = 100000020
},
{
address: TC1ZCj9Ne3j5v3TLx5ZCDLD55MU9g3XqQW,
url = "http://GR8.com",
voteCount = 100000019
},
{
address: TWm3id3mrQ42guf7c4oVpYExyTYnEGy3JL,
url = "http://GR9.com",
voteCount = 100000018
},
{
address: TCvwc3FV3ssq2rD82rMmjhT4PVXYTsFcKV,
url = "http://GR10.com",
voteCount = 100000017
},
{
address: TFuC2Qge4GxA2U9abKxk1pw3YZvGM5XRir,
url = "http://GR11.com",
voteCount = 100000016
},
{
address: TNGoca1VHC6Y5Jd2B1VFpFEhizVk92Rz85,
url = "http://GR12.com",
voteCount = 100000015
},
{
address: TLCjmH6SqGK8twZ9XrBDWpBbfyvEXihhNS,
url = "http://GR13.com",
voteCount = 100000014
},
{
address: TEEzguTtCihbRPfjf1CvW8Euxz1kKuvtR9,
url = "http://GR14.com",
voteCount = 100000013
},
{
address: TZHvwiw9cehbMxrtTbmAexm9oPo4eFFvLS,
url = "http://GR15.com",
voteCount = 100000012
},
{
address: TGK6iAKgBmHeQyp5hn3imB71EDnFPkXiPR,
url = "http://GR16.com",
voteCount = 100000011
},
{
address: TLaqfGrxZ3dykAFps7M2B4gETTX1yixPgN,
url = "http://GR17.com",
voteCount = 100000010
},
{
address: TX3ZceVew6yLC5hWTXnjrUFtiFfUDGKGty,
url = "http://GR18.com",
voteCount = 100000009
},
{
address: TYednHaV9zXpnPchSywVpnseQxY9Pxw4do,
url = "http://GR19.com",
voteCount = 100000008
},
{
address: TCf5cqLffPccEY7hcsabiFnMfdipfyryvr,
url = "http://GR20.com",
voteCount = 100000007
},
{
address: TAa14iLEKPAetX49mzaxZmH6saRxcX7dT5,
url = "http://GR21.com",
voteCount = 100000006
},
{
address: TBYsHxDmFaRmfCF3jZNmgeJE8sDnTNKHbz,
url = "http://GR22.com",
voteCount = 100000005
},
{
address: TEVAq8dmSQyTYK7uP1ZnZpa6MBVR83GsV6,
url = "http://GR23.com",
voteCount = 100000004
},
{
address: TRKJzrZxN34YyB8aBqqPDt7g4fv6sieemz,
url = "http://GR24.com",
voteCount = 100000003
},
{
address: TRMP6SKeFUt5NtMLzJv8kdpYuHRnEGjGfe,
url = "http://GR25.com",
voteCount = 100000002
},
{
address: TDbNE1VajxjpgM5p7FyGNDASt3UVoFbiD3,
url = "http://GR26.com",
voteCount = 100000001
},
{
address: TLTDZBcPoJ8tZ6TTEeEqEvwYFk2wgotSfD,
url = "http://GR27.com",
voteCount = 100000000
}
]
timestamp = "0" #2017-8-26 12:00:00
parentHash = "0xe58f33f9baf9305dc6f82b9f1934ea8f0ade2defb951258d50167028c780351f"
}
// Optional.The default is empty.
// It is used when the witness account has set the witnessPermission.
// When it is not empty, the localWitnessAccountAddress represents the address of the witness account,
// and the localwitness is configured with the private key of the witnessPermissionAddress in the witness account.
// When it is empty,the localwitness is configured with the private key of the witness account.
//localWitnessAccountAddress =
localwitness = [
]
#localwitnesskeystore = [
# "localwitnesskeystore.json"
#]
block = {
needSyncCheck = true
maintenanceTimeInterval = 21600000
proposalExpireTime = 259200000 // 3 day: 259200000(ms)
}
# Transaction reference block, default is "solid", configure to "head" may cause TaPos error
# trx.reference.block = "solid" // head;solid;
# This property sets the number of milliseconds after the creation of the transaction that is expired, default value is 60000.
# trx.expiration.timeInMilliseconds = 60000
vm = {
supportConstant = false
maxEnergyLimitForConstant = 100000000
minTimeRatio = 0.0
maxTimeRatio = 5.0
saveInternalTx = true
# Indicates whether the node stores featured internal transactions, such as freeze, vote and so on
saveFeaturedInternalTx = true
# Indicates whether the node stores the details of the internal transactions generated by the
# CANCELALLUNFREEZEV2 opcode, such as bandwidth/energy/tronpower cancel amount.
# saveCancelAllUnfreezeV2Details = false
# In rare cases, transactions that will be within the specified maximum execution time (default 10(ms)) are re-executed and packaged
# longRunningTime = 10
# Indicates whether the node support estimate energy API.
# estimateEnergy = false
# Indicates the max retry time for executing transaction in estimating energy.
# estimateEnergyMaxRetry = 3
}
committee = {
allowCreationOfContracts = 0 //mainnet:0 (reset by committee),test:1
allowAdaptiveEnergy = 0 //mainnet:0 (reset by committee),test:1
}
event.subscribe = {
native = {
useNativeQueue = true // if true, use native message queue, else use event plugin.
bindport = 5555 // bind port
sendqueuelength = 1000 //max length of send queue
}
version = 0
# Specify the starting block number to sync historical events. This is only applicable when version = 1.
# After performing a full event sync, set this value to 0 or a negative number.
# startSyncBlockNum = 1
path = "" // absolute path of plugin
server = "" // target server address to receive event triggers
// dbname|username|password, if you want to create indexes for collections when the collections
// are not exist, you can add version and set it to 2, as dbname|username|password|version
// if you use version 2 and one collection not exists, it will create index automaticaly;
// if you use version 2 and one collection exists, it will not create index, you must create index manually;
dbconfig = ""
contractParse = true
topics = [
{
triggerName = "block" // block trigger, the value can't be modified
enable = false
topic = "block" // plugin topic, the value could be modified
solidified = false // if set true, just need solidified block, default is false
},
{
triggerName = "transaction"
enable = false
topic = "transaction"
solidified = false
ethCompatible = false // if set true, add transactionIndex, cumulativeEnergyUsed, preCumulativeLogCount, logList, energyUnitPrice, default is false
},
{
triggerName = "contractevent"
enable = false
topic = "contractevent"
},
{
triggerName = "contractlog"
enable = false
topic = "contractlog"
redundancy = false // if set true, contractevent will also be regarded as contractlog
},
{
triggerName = "solidity" // solidity block trigger(just include solidity block number and timestamp), the value can't be modified
enable = true // the default value is true
topic = "solidity"
},
{
triggerName = "solidityevent"
enable = false
topic = "solidityevent"
},
{
triggerName = "soliditylog"
enable = false
topic = "soliditylog"
redundancy = false // if set true, solidityevent will also be regarded as soliditylog
}
]
filter = {
fromblock = "" // the value could be "", "earliest" or a specified block number as the beginning of the queried range
toblock = "" // the value could be "", "latest" or a specified block number as end of the queried range
contractAddress = [
"" // contract address you want to subscribe, if it's set to "", you will receive contract logs/events with any contract address.
]
contractTopic = [
"" // contract topic you want to subscribe, if it's set to "", you will receive contract logs/events with any contract topic.
]
}
}
eth_getLogs will return results.
The problem could not be recovered after 3 attempts.
When submitting logs: please submit them as text and not screenshots.
Software Versions
OS : Linux
JVM : Oracle Corporation 1.8.0_202 amd64
Git : 72e31d9
Version : 4.8.0
Code : 18631
Expected behaviour
eth_getLogs will return results.
synchronizing events from specific historical blocks
------------start.sh-------------
---------------main_net_config.conf--------------------
-------------------log----------------------
Actual behaviour
eth_getLogs will return results.
Frequency
The problem could not be recovered after 3 attempts.
Steps to reproduce the behaviour
Backtrace
When submitting logs: please submit them as text and not screenshots.